Equipment 2017-11-14T17:24:59+00:00

Mechanical Testing

MTS 810 Material Testing System
The 810 Material Testing System delivers a broad array of testing capabilities for both low and high force static and dynamic testing.

  • Force Capacities: 25 kN to 100 kN
    1st Calibrated Point as low as 2N
  • Dynamic Stroke: 152 mm
  • Materials: plastics to aluminum, composites and steel
  • Testing capability: Tensile to high cycle fatigue, fracture mechanics, and durability of components

MTS Landmark Floor-standing and Table-top
MTS Landmark Systems deliver a broad array of testing capabilities for both low and high force static and dynamic testing.

  • Force Capacity: up to 250 kN
    1st Calibrated Point as low as 2N
  • Dynamic Stroke: up to 250 mm
  • Materials: ranging in strength from plastics to aluminum, composites and steel
  • Testing capability: tension, compression, bending and fatigue tests; specialized tests for biomedical and biomechanical testing; and durability testing on small components

Unholtz-Dickie Model SAI60F-H560B 16LP
Vibration Test System

  • Sine Force (pk) : 8,000 lbf (35.6 kN)
  • Random Force (rms): 8,000 lbf (35.6 kN)
  • Shock Force: 19,000 lbf (85kN)
  • Usable Frequency Range: DC to 3,000 Hz.
  • With and Without Horizontal Sliptable
  • With and Without Temperature/Humidity Chamber
    -73°C to +180°C
    10%RH to 98%RH
h560_nobackgrounddownload

iMicro
Nanoindentation hardness testing is a reliable method to determine module elasticity, surface and coating hardness.

  • Displacement range: 80microns
  • Displacement resolution: 0.04nm
  • Typical noise: <0.1nm
  • Load application: coil/magnet
  • Typical indenter normal stiffness: 80N/m
  • Damping coefficient: 0.05N-s/m
  • Typical resonant frequency: 120Hz
  • Drift rate: <0.05nm/s
rsz_nanomechanicsimg_3247

Metrology

ATOS III-Triple Scan
Easy scanning of shiny or dark surfaces and complex parts.

  • Camera Pixels: 2 x 8 000 000
  • Measuring Area: 38 x 29 - 2000 x 1500 ㎟
  • Point Spacing: 0.01 - 0.61 mm
  • Measured points per scan: 8 million points
  • Operating Temperature: 5 -40 degree, non condensing
  • Non-contact structured light 3D scanner for part digitizing
  • Simplify complex measurement tasks in product development and production
  • Shorten development processes
  • Improved product quality & faster measurement
  • Higher production throughput

MCAx-Manual CMM ARM
MMDx/MMC
CMM arm measures different object sizes, surface finishes.

  • 7-axis versions
  • Accuracy in volumetric length: 25μm
  • Accuracy down to: 10μm(Laser scanner)
  • Available in lengths: between 2m and 4.5m
MCAⅡ_8ft7軸

XT H 225
XT H 225 systems feature a microfocus X-ray source offering high image resolution.

  • Operationg Voltage: 30 to 225 kV
  • Beam current: 0 to 1mA
  • Power rating: 225 W High Power
  • Focal spot size: 3μm
  • Beam angle: 25° included angle, conical beam
  • Filament type: Tungsten
  • Manipulator max travel: 185 mm in X, 280 mm in Y and 730 mm in Z
  • Maximum weight: 15kg
  • Varian 2520Dx 16bit Digital Panel
rsz_1rsz_1rsz_xth225_shadow

Machining

Haas ST20Y
The ability to turn and mill complex parts and perform multiple operations on one machine increases throughput, reduces handling, and improves accuracy.

  • 305 x 533 mm Max Capacity
  • 4000-rpm Spindle
  • 14,9kW Vector Drive
  • 12-Station BOT Turret
  • Chuck Size: 210 mm
  • Max Cutting Diameter: 305 mm
  • Max Cutting Length without workholding: 533 mm

Travels & Feedrates

  • X Axis: 236 mm
  • Y Axis: ±51 mm
  • Z Axis: 533 mm
  • X-Axis Rapids: 12 m/min
  • Y-Axis Rapids: 12 m/min
  • Z-Axis Rapids: 24.0 m/min

Haas VF2 CNC Mill

Travels

  • X Axis: 762mm
  • Y Axis: 406 mm
  • Z Axis: 508mm
  • X-Axis Rapids: 25.4 m/min
  • Y-Axis Rapids: 25.4 m/min
  • Z-Axis Rapids: 25.4 m/min

Table

  • Length: 914 mm
  • Width: 356 mm
  • T-Slot Width: 16 mm
  • T-Slot Center Distance: 1250.0 mm
  • Max Weight on Table (evenly distributed): 1361 kg